# Soft robot made from two elastomers crawls, jumps and climbs slopes

https://jsonscraper.com/blog/soft-robot-two-elastomers-crawl-jump

Author: Michael Johnson

Published: 2026-11-20T07:33:30+00:00

Updated: 2026-11-20T07:33:30+00:00

In a laboratory prototype, one material changes the body’s shape while the other powers its movement, allowing the small robot to switch between different ways of getting around.

![a small plastic man standing on a table](https://images.unsplash.com/photo-1561719998-e6763867e182?ixid=M3wxMDc5MjYxfDB8MXxhbGx8fHx8fHx8fHwxNzk1MTU5OTI0fA&ixlib=rb-4.1.0&w=1600&h=900&fit=crop&crop=center&q=80&fm=webp)

Image credit: Brett Jordan

A single soft robot can crawl forwards and backwards, jump, roll and climb an incline. In a study published on November 14, 2026, in [Nature Communications](https://doi.org/10.1038/s41467-026-79466-w), researchers describe how to achieve this without a rigid frame: by combining two elastomers that perform different mechanical roles.



![A small plastic man standing on a table](https://images.unsplash.com/photo-1561719998-e6763867e182?ixid=M3wxMDc5MjYxfDB8MXxhbGx8fHx8fHx8fHwxNzk1MTU5OTI0fA&ixlib=rb-4.1.0&w=1600&h=900&fit=crop&crop=center&q=80&fm=webp)

The MHE-Robot laboratory prototype: two soft active layers allow it to change its body shape and mode of movement. Image from the article in Nature Communications; check the publisher’s terms of use before publication.[Brett Jordan](https://unsplash.com/@brett_jordan?utm_source=jsonscraper&utm_medium=referral) · [Unsplash License](https://unsplash.com/license)



The device is called MHE-Robot. Its design resembles a “skeleton and muscle” pair, except both parts are made from soft active materials. One material helps the body bend and determines its shape; the other deforms quickly and propels the robot. This differs from designs in which a single actuator must provide both movement and support the body’s desired geometry.



## Two materials, two jobs



The design uses a liquid crystal elastomer (LCE) and a dielectric elastomer (PHDE). Their functions are divided: the LCE changes the body’s geometry and creates a supporting bend, while the PHDE acts like an artificial muscle, deforming rapidly under an electrical voltage to produce movement.



When the body changes shape, it can gain a more useful point of support or prepare for a jump. The fast actuator then initiates movement. The authors compared the robot’s performance with and without LCE activation: the additional material changes the geometry and mechanical conditions under which the main actuator operates.



The researchers demonstrated bidirectional crawling, jumping, climbing a slope and controlled rolling. In laboratory tests, the robot crawled at up to 2.3 centimeters per second. These measurements apply to this specific prototype and experimental conditions.



## Climbing and jumping require different settings



The role of shape change is especially clear on a slope. In a test on a 20° incline, the robot slid downhill under some settings when the LCE was not activated. With the LCE switched on, its climbing speed reached about 1.1 centimeters per second at a PHDE voltage of 2 kV and a frequency of 0.5 Hz, while the LCE voltage was 1.8 V. The materials need to work in coordination: changing shape helps the robot move uphill.



For a jump, the LCE first bends the body, while the PHDE helps fold it and then rapidly straighten it. In the study’s graph, the maximum measured distance was about 2.2 body lengths with the PHDE activated at 2.2 kV and 0.1 Hz; the highest value was shown at an LCE voltage of 1.8 V. This is a specific result from a laboratory prototype, not a specification for a finished product.



Overall, the comparison shows why the design has two active layers: changing shape helps the robot prepare a support point or a movement, while the fast actuator produces a dynamic push. The authors contrast this multilayer soft structure with designs that use extra components and rigid connections, which can complicate construction and create problems at material interfaces.



## A laboratory prototype, not a finished machine



The robot combined several modes of movement in one body and demonstrated them under laboratory conditions. Practical use will depend on the parameters of the specific environment and design; the study focuses on how two active elastomers can divide the tasks of shaping the body and generating movement.



Comparing this design with conventional walking robots on speed alone would be of limited value: the tests examined movement flexibility, jumping and the ability to change shape, not transport performance. The useful takeaway is that a soft machine can produce different types of movement when its materials take on different parts of the mechanical task.



When a robot needs to move through a confined space or avoid obstacles, a fixed rigid shape can get in the way. This experiment demonstrates one way to design a system that changes both its mode of movement and its own shape. Assessing performance in a specific real-world environment will require relevant tests; the article demonstrates a laboratory design principle.
